產品介紹 Product introduction

PI復合硅膠皮 PI composite silicone rubber

PI復合硅膠皮是一款由PI film與高彈性有機硅橡膠材料結合而成的新型高分子材料，材料具有超薄、超平整度、的韌性等主要特性；它有力地結合了有機硅膠分子的導熱性能、緩沖性能以及PI的獨特韌性及穩定度，超薄且平整的材料是與傳統緩沖材大之區別，其還具有厚度公差小、導熱速度快、單個位置使用率高等優點，能滿足許多有特殊要求的設備使用。主要適用于高要求的熱壓設備，可隔絕超高溫產生的硅油與產品的直接接觸，對溫度有緩沖作用，使溫度較為均勻，平坦的表面可防止異物的殘留，以免影響熱壓頭因有殘留雜物而造成的熱壓效果，同時具有隔離保護作用。

PI composite silicone rubber is a new polymer material composed of PI film and high elastic silicone rubber. The material has the main characteristics of ultra-thin, super flatness and perfect toughness; It effectively combines the thermal conductivity and cushioning performance of organic silica gel molecules and the unique toughness and stability of PI. The ultra-thin and flat material is the biggest difference from the traditional buffer material. It also has the advantages of small thickness tolerance, fast thermal conductivity and high utilization rate at a single position, which can meet the use of many equipment with special requirements. It is mainly applicable to the hot pressing equipment with high requirements. It can isolate the direct contact between the silicone oil produced by ultra-high temperature and the product, buffer the temperature and make the temperature more uniform. The super flat surface can prevent the residue of foreign matters, so as not to affect the hot pressing effect caused by residual sundries of the hot pressing head, and has the function of isolation and protection.

產品型號Product model：

PI-G-0.1,   PI-G-0.15  ,PI-G-0.2 ,   PI-G-0.25,  PI-G-0.3  PI-G-0.45（灰色導熱系列）

PI-B-0.1,   PI-B-0.15  ,PI-B-0.2 ,   PI-B-0.25,  PI-B-0.3  PI-B-0.45(黑色抗靜電系列)

產品用途：

1、適用于各類新型（柔性屏、3D眼鏡、OREDT、TP）COG與FOG綁定加熱壓合過程的防護、緩沖和隔離，可替代目前普通設備使用的氟材料、硅材料以及玻璃纖維等復合材料。

2、主要替代目前傳統使用性能單一的壓合材料，與傳統壓合材料比有更輕薄、更平整、導熱快、受熱均勻、不滲油等特點。

3、特別適用于惡劣環境(高溫、耐油、高強度、高頻率)生產環境下的使用。

Usages of product:

1. It can be applied to bonding procedure of COG and FOG for FPC,3D eyeglasses,OEDT and TP etc. As buffering tools.it can replace some composite glass fiber material such as fluorine,silicone etc。

2. It can replace traditional compress material majorly. Comparing to traditional composite materials, SIC products are more thin and flat. The thermal conductivity performs fast and evenly。

3. It can be applied to severe environment(high-temperature,high pressure,high frequency etc)。

產品特點：

1、厚度薄，厚度公差極小、表面平整、導熱均勻。

2、耐高壓、耐高溫、耐老化。

3、不出油。

Features of product:

1.The thickness is thin, the thickness tolerance is very small, the surface is flat and the heat conduction is uniform.

2. High pressure resistance, high temperature resistance and aging resistance.

3. No oil。

產品規格：

1、（厚T：0.05--1mm*（寬W：5mm-1000mm）*（長L：5-100m）。

2、黑色(黑色抗靜電系列)。

3.灰色（灰色導熱系列）。

Product specifications:

1. (Thickness 0.05--1mm) * (width 5mm-1000mm) * (length 5-100m)。

2. Black (black antistatic Series)。

3.Grey (grey Series)。

PI復合硅膠皮性能參數：