當前位置:首頁 > 產品展示 > FPC層壓硅膠墊
聯系人:15999854468 陳小姐(業務)
聯系人:13825780530 盧先生(技術)
郵箱:2452354118@qq.com
產品介紹:Product introduction
FPC層壓綠色硅膠墊
FPC層壓綠色硅膠墊(綠硅膠Green silicone pad)是一種由有機硅橡膠添加耐高溫納米材料及導熱粉末混合而成的獨特合成彈性體。它地平衡了機械性質和化學性質,能滿足今天許多苛刻的應用場合要求。主要適用于熱壓層壓設備,F(xiàn)PC、PCB等產品的生產工藝,能與該產品直接接觸而不吸出硅膠油,對溫度有一定的緩沖作用,使溫度較為均勻,隔離被熱壓產品與熱壓頭直接接觸,以免熱壓頭有殘留雜物影響其平坦度,同時具有防止靜電漏電的隔離保護作用。
Products introduction:
FPC laminated green silicone pad is a unique synthetic elastomer composed of silicone rubber, high temperature resistant nano materials and heat conductive powder. It perfectly balances mechanical and chemical properties and can meet the requirements of many demanding applications today. It is mainly applicable to the production process of hot laminating equipment, FPC, PCB and other products. It can directly contact with the product without sucking out silicone oil. It has a certain buffer effect on the temperature, so as to make the temperature more uniform. It can isolate the hot pressed products from direct contact with the hot indenter, so as to avoid residual sundries affecting its flatness. At the same time, it can prevent electrostatic leakage。
產品型號:
Product models:
FPC-G-0.8MM; FPC-G-1.6MM; FPC-R-0.8MM ; FPC-R-1.6MM(常規系列)
FPC-G-N-0.8MM; FPC-G-N-1.6MM;(無硅油系列)
產品用途:
1、適用于各類FPC柔性線路板生產工藝壓合過程的導熱,緩沖和隔離。
2、各類其它設備進行壓合,隔離、緩沖、導熱,絕緣而使用。
Usages of the products;
1.It is suitable for heat conduction, cushioning and isolation in the crimping process of various FPC flexible circuit boards.
2. All kinds of other equipment are used for pressing, isolation, buffering, heat conduction and insulation.
產品特點:
1、耐高溫(-40℃至320℃)、耐高壓、不出油。
2、導熱迅速、均勻,節約能源、節省成本。
3、良好的緩沖性、回彈性好、韌性極強,延長加熱板和層壓板的使用壽命。
4、具有良好絕緣性及良好的壓力穩定性,耐用、使用周期長。
Features of products:
1. High temperature resistance(-40℃ to 320℃),high pressure resistance.
2. Thermal conductivity performs well and evenly.
FPC層壓硅膠板性能參數:
Product model 產品型號
thickness 厚度(mm)
colour 顏 色
hardness 硬度(A)
Pressure resistance 耐壓力(MPA)
proportion 比重(g/mm3)
Recommended temperature 推薦使用溫度°C
FPC-G-0.8MM
1.6
綠色
55-65
10
1.2-1.3
—40--250
Compression deformation rate 壓縮變形率 %
Thermal conductivity 熱導率 W/(㎡*k) Btu/(ft2*h*°F)
Dielectric constant 介電常數
Dielectric strength 介電強度volts/mil
tensile strength 拉伸強度(Mpa)
Maximum temperature 大溫度°C
≤10
0.3
2.1
3.5
405
0.8
280
上一篇:FPC層壓硅膠墊 (2)
下一篇:沒有了
廣東省東莞市寮步鎮曲嶺二路22號深智恒工業園右邊中間電梯4樓
廣東君點科技有限公司 版權所有©Copyright2021 備案號:粵ICP備2021109649號 技術支持:東莞網站建設